- 油基鉆井液產品
- 水基鉆井液產品
- 固井產品
- 堵漏產品
- 其他產品
產品中心
HarMUL 油基主乳化劑 HarMUL Oil-based Primary Emulsifier
簡介Introduction
HarMUL采用創(chuàng )新的分子設計與合成工藝，是人工合成的具有多活性官能團的表面活性劑，具備優異的乳化性能，可形成穩定的油包水型乳狀液，單劑使用成本較傳統乳化劑更具優勢。
HarMUL, developed through cutting-edge molecular design and synthesis technologies, is a synthetically produced surfactant with multiple surface-active groups. It exhibits excellent emulsifying performance, capable of forming stable water-in-oil emulsions, and its unit cost is relatively lower compared to conventional emulsifiers.
性能及優點Performance and Advantages
l 推薦加量：3%~5%；
l 成本較低：較常規乳化劑價格低，配制成本相對較低；
l 抗溫性能較好：體系抗溫達150℃，粘切適中，破乳電壓600V以上，高溫高壓濾失量小于3.0mL；
l 抗污染性?xún)?yōu)異：體系抗污染性能良好，抗鉆屑、地層水、壓裂液等能力良好。
l Recommended dosage: 3% to 5%;
l Cost-effective: It has a lower price compared to conventional emulsifiers, resulting in relatively lower formulation costs;
l Good temperature resistance: The system can withstand temperatures up to 150℃, with moderate viscosity and plastic viscosity, a demulsification voltage exceeding 600V, and a high-temperature high-pressure fluid loss of less than 3mL;
l Excellent pollution resistance: The system demonstrates good resistance to contamination, including resistance to drill cuttings, formation water, fracturing fluids, etc.
技術參數Technical Parameters
項目Item | 技術指標Technical Index | |
外觀Appearance | 可流動液體flowable liquid | |
密度Density(20°C)/(g/cm3) | 0.90-1.00 | |
傾點Pour Point/(℃) | ≤-10 | |
pH | 5.0-8.0 | |
乳化率Emulsification Rate/（%） | 熱滾前Before Hot Rolling | ≥90.0 |
熱滾后After Hot Rolling | ≥90.0 | |
破乳電壓Emulsion Breaking Voltage/（50℃，V) | 熱滾前Before Hot Rolling | ≥500 |
熱滾后After Hot Rolling | ≥500 | |
包裝Packaging
采用鍍鋅桶或塑料桶包裝，包裝牢固、密封良好，可根據用戶需求提供200L、50L兩種分裝規格。
The product is packaged in galvanized or plastic drums that are securely sealed. It is available in 200L and 50L sizes, packaged according to customer requirements.
